Digital Music Production – Ang Mga Pangunahing Kaalaman ng paghahalo
After that we have included performances and musicians, the next step in the production of music tracks from different sources or blend in a mixture. Mixing is the process of combining two or more sources into a coherent sound. For commercial songs mixing is to combine the various elements of the song (instruments, vocals and effects) and paste them in a work uniform. The purpose of blending is to create a song that is in line to enter the field of music and the base mixture may geluid worden verdeeld followed these 3 parts: 1.
Level (or volume). Combining elements that link the level of the track and changing the level of each instrument or track. If something sounds like it is early (or even in your face), then a process we can use to change the level by changing the cursor under the console (or virtual console in your DAW). Conversely, if an item is too far or too quiet, we can increase the level of progress a bit '. Sound field as if a 3-dimensional space, the level of manipulation is the same as changing the position of the elements from the earlier (higher-level means more resonance at a lower level than other means of investigation) .
2. Stereo Image (or wash). When you work in a stereo mix (which is the norm in most contemporary music today), we can balance the elements of the mix, changing their position overview. Pan (or skillet) is short for panoramic potentiometer: Panoramic means that we can place the sound source or audio elements in an area that stretches from left to right of center. At the beginning of the period of recording music, was the only single technology – there was no reason to determine which instrument was placed in one location.
But since the advent of stereo panning process gives us a more realistic picture of his new position imitating instruments in a live concert (halimbawa, we put the drums and sings in the middle phase the guitar just right, the keyboard slightly to the left, etc.). The proper approach to the scales to listen to music and pay attention to the stereo and the introduction of instruments to imitate. By analogy in three dimensions to pan left means left and right pans to the right resources (rather simple) .
3. Dalas (or compensation). This is one of the most advanced mixing techniques, because the equalization process is needed right of its harmonic content of elements and understand how to change the frequency of the sound of the instrument (halimbawa, the most influential bass drum and the low frequency change in thus the frequency can be a great impact on the timbre of sound). When we were mixing, and there are elements that remain sound as if they collide, it is useful to cut a profile for the collision frequency specific instruments (eg reducing the frequency of electric guitar is the Same that the vocal range).
In three dimensions, change the frequency content is the same as the placement of up and down (frequency content, the greater the localization of sound – so low they tend to sound like them "under" other elements). Combining these three bases of mixtures, you can start with a higher number of coherence and unity if we had to do with the recording and scope. Hopefully this article provides an overview of the finer aspects of music mixes production.To agility, Endy
Related posts:
- Music Production at paghahalo Tips & Tricks
- The Basics of Acoustics – Timbre (Part 2)
- Paggamit ng iyong Music pagtatala ng Software sa Lay Down Tracks sa iyong Digital Audio Workstation
- Sound and Music Production in Movies: More Than What You See
- Home pagtatala ng Studio Basics – Narito Ano ang Kailangan mong Record
- Kawalan ng ulirat sa Produksyon 2009 (Part 2)
- Home pagtatala ng Studio Basics – Narito Ano ang Kailangan mong Record
- Home pagtatala ng Studio Basics – Narito Ano ang Kailangan mong Record
- Music tagalikha Pagsasanay
- Propellerhead Dahilan Devices – NN-19 & NN-XT
Tags: audio mixing, Dalas, halo, produksyon ng musika, stereo image
